Add footprints, updated footprint selection in schematic.

[ATX-PSU-Breakout-Board.git] / footprints / Female-ATX-20-right-angle.fp

diff --git a/footprints/Female-ATX-20-right-angle.fp b/footprints/Female-ATX-20-right-angle.fp
new file mode 100644 (file)
index 0000000..2426592
--- /dev/null
+++ b/footprints/Female-ATX-20-right-angle.fp
@@ -0,0 +1,29 @@
+
+Element["" "" "ATX_Power" "" 52500 95000 57500 -52500 0 100 ""]
+(
+       Pin[49607 21653 11000 2000 11600 5900 "Pwr_On" "16" "edge2"]
+       Pin[33072 21653 11000 2000 11600 5900 "GND" "15" "edge2"]
+       Pin[16536 21653 11000 2000 11600 5900 "-12v" "14" "edge2"]
+       Pin[1 21653 11000 2000 11600 5900 "+3.3v" "13" "edge2"]
+       Pin[66143 21653 11000 2000 11600 5900 "GND" "17" "edge2"]
+       Pin[82678 21653 11000 2000 11600 5900 "GND" "18" "edge2"]
+       Pin[99214 21653 10500 2000 11100 5900 "GND" "19" "edge2"]
+       Pin[115749 21653 11000 2000 11600 5900 "NC" "20" "edge2"]
+       Pin[33071 0 11000 2000 11600 5900 "GND" "3" "edge2"]
+       Pin[66142 0 11000 2000 11600 5900 "GND" "5" "edge2"]
+       Pin[82677 0 11000 2000 11600 5900 "+5v" "6" "edge2"]
+       Pin[99213 0 11000 2000 11600 5900 "GND" "7" "edge2"]
+       Pin[115748 0 11000 2000 11600 5900 "Pwr_OK" "8" "edge2"]
+       Pin[132284 0 11000 2000 11600 5900 "+5v_SB" "9" "edge2"]
+       Pin[148819 0 11000 2000 11600 5900 "+12v" "10" "edge2"]
+       Pin[0 0 11000 2000 11600 5900 "+3.3v" "1" "edge2"]
+       Pin[49606 0 11000 2000 11600 5900 "+5v" "4" "edge2"]
+       Pin[16535 0 11000 2000 11600 5900 "+3.3v" "2" "edge2"]
+       Pin[148820 21653 11000 2000 11600 5900 "+5v" "22" "edge2"]
+       Pin[132285 21653 11000 2000 11600 5900 "+5v" "21" "edge2"]
+       ElementLine [-10432 -3938 159253 -3938 1100]
+       ElementLine [-10432 -55119 -10432 -3938 1100]
+       ElementLine [159253 -55119 159253 -3938 1100]
+       ElementLine [-10432 -55119 159253 -55119 1100]
+
+       )