Add footprints, updated footprint selection in schematic.

diff --git a/footprints/CPolar100.fp b/footprints/CPolar100.fp
new file mode 100644 (file)
index 0000000..2b024a2
--- /dev/null
+++ b/footprints/CPolar100.fp
@@ -0,0 +1,18 @@
+# author: Amand Tihon
+# email: amand.tihon@alrj.org
+# dist-license: GPL3, http://www.gnu.org/licenses/gpl-3.0.txt
+# use-license: unlimited
+
+
+Element["" "" "C000" "" 20000 20000 12500 -15000 0 100 ""]
+(
+       Pin[-5000 0 8000 2000 8600 1500 "1" "1" ""]
+       Pin[5000 0 8000 2000 8600 1500 "2" "2" ""]
+       ElementLine [-5000 -10000 -5000 -5000 1500]
+       ElementLine [-7500 -7500 -2500 -7500 1500]
+       ElementArc [0 0 12500 12500 270 90 1500]
+       ElementArc [0 0 12500 12500 180 90 1500]
+       ElementArc [0 0 12500 12500 90 90 1500]
+       ElementArc [0 0 12500 12500 0 90 1500]
+
+       )

diff --git a/footprints/CPolar_D4_S2.fp b/footprints/CPolar_D4_S2.fp
new file mode 100644 (file)
index 0000000..f1153a9
--- /dev/null
+++ b/footprints/CPolar_D4_S2.fp
@@ -0,0 +1,13 @@
+
+Element["" "" "C001" "" 52.5000mm 16.7500mm 1.5000mm -3.0000mm 0 100 ""]
+(
+       Pin[-1.0000mm 0.0000 1.7000mm 20.00mil 1.8524mm 0.8000mm "1" "1" ""]
+       Pin[1.0000mm 0.0000 1.7000mm 20.00mil 1.8524mm 0.8000mm "2" "2" ""]
+       ElementLine [0.0000 -1.2500mm -1.0000mm -1.2500mm 0.1810mm]
+       ElementLine [-0.5000mm -1.7500mm -0.5000mm -0.7500mm 0.1810mm]
+       ElementArc [0.0000 0.0000 2.0000mm 2.0000mm 0 90 10.00mil]
+       ElementArc [0.0000 0.0000 2.0000mm 2.0000mm 90 90 10.00mil]
+       ElementArc [0.0000 0.0000 2.0000mm 2.0000mm 180 90 10.00mil]
+       ElementArc [0.0000 0.0000 2.0000mm 2.0000mm 270 90 10.00mil]
+
+       )

diff --git a/footprints/CPolar_D5_S2.fp b/footprints/CPolar_D5_S2.fp
new file mode 100644 (file)
index 0000000..33f7a17
--- /dev/null
+++ b/footprints/CPolar_D5_S2.fp
@@ -0,0 +1,13 @@
+
+Element["" "" "C000" "" 73.2500mm 40.0000mm 2.2500mm -3.0000mm 0 100 ""]
+(
+       Pin[-1.0000mm 0.0000 1.7000mm 20.00mil 1.8524mm 0.8000mm "1" "1" ""]
+       Pin[1.0000mm 0.0000 1.7000mm 20.00mil 1.8524mm 0.8000mm "2" "2" ""]
+       ElementLine [-0.2500mm -1.5000mm -1.2500mm -1.5000mm 0.1810mm]
+       ElementLine [-0.7500mm -2.0000mm -0.7500mm -1.0000mm 0.1810mm]
+       ElementArc [0.0000 0.0000 2.5000mm 2.5000mm 0 90 10.00mil]
+       ElementArc [0.0000 0.0000 2.5000mm 2.5000mm 90 90 10.00mil]
+       ElementArc [0.0000 0.0000 2.5000mm 2.5000mm 180 90 10.00mil]
+       ElementArc [0.0000 0.0000 2.5000mm 2.5000mm 270 90 10.00mil]
+
+       )

diff --git a/footprints/Female-ATX-20-right-angle.fp b/footprints/Female-ATX-20-right-angle.fp
new file mode 100644 (file)
index 0000000..2426592
--- /dev/null
+++ b/footprints/Female-ATX-20-right-angle.fp
@@ -0,0 +1,29 @@
+
+Element["" "" "ATX_Power" "" 52500 95000 57500 -52500 0 100 ""]
+(
+       Pin[49607 21653 11000 2000 11600 5900 "Pwr_On" "16" "edge2"]
+       Pin[33072 21653 11000 2000 11600 5900 "GND" "15" "edge2"]
+       Pin[16536 21653 11000 2000 11600 5900 "-12v" "14" "edge2"]
+       Pin[1 21653 11000 2000 11600 5900 "+3.3v" "13" "edge2"]
+       Pin[66143 21653 11000 2000 11600 5900 "GND" "17" "edge2"]
+       Pin[82678 21653 11000 2000 11600 5900 "GND" "18" "edge2"]
+       Pin[99214 21653 10500 2000 11100 5900 "GND" "19" "edge2"]
+       Pin[115749 21653 11000 2000 11600 5900 "NC" "20" "edge2"]
+       Pin[33071 0 11000 2000 11600 5900 "GND" "3" "edge2"]
+       Pin[66142 0 11000 2000 11600 5900 "GND" "5" "edge2"]
+       Pin[82677 0 11000 2000 11600 5900 "+5v" "6" "edge2"]
+       Pin[99213 0 11000 2000 11600 5900 "GND" "7" "edge2"]
+       Pin[115748 0 11000 2000 11600 5900 "Pwr_OK" "8" "edge2"]
+       Pin[132284 0 11000 2000 11600 5900 "+5v_SB" "9" "edge2"]
+       Pin[148819 0 11000 2000 11600 5900 "+12v" "10" "edge2"]
+       Pin[0 0 11000 2000 11600 5900 "+3.3v" "1" "edge2"]
+       Pin[49606 0 11000 2000 11600 5900 "+5v" "4" "edge2"]
+       Pin[16535 0 11000 2000 11600 5900 "+3.3v" "2" "edge2"]
+       Pin[148820 21653 11000 2000 11600 5900 "+5v" "22" "edge2"]
+       Pin[132285 21653 11000 2000 11600 5900 "+5v" "21" "edge2"]
+       ElementLine [-10432 -3938 159253 -3938 1100]
+       ElementLine [-10432 -55119 -10432 -3938 1100]
+       ElementLine [159253 -55119 159253 -3938 1100]
+       ElementLine [-10432 -55119 159253 -55119 1100]
+
+       )

diff --git a/power.sch b/power.sch
index 9b11fdc8618d974ae9995390328ffe39447dbd1c..4d9e3336086e233b3cc99c1a0a0528c21cdd185a 100644 (file)
--- a/power.sch
+++ b/power.sch
@@ -172,7 +172,7 @@ symversion=0.1
 T 39200 51900 5 10 1 1 0 0 1
 value=10uF
 T 39000 52700 5 10 0 0 0 0 1
-footprint=CPolar_D6.3_S2
+footprint=CPolar_D5_S2
 }
 C 41100 52300 1 0 0 7414-2.sym
 {